VFDs

VLT® AutomationDrive

The VLT® AutomationDrive is a single drive concept that covers the entire spectrum of drives applications – a major benefi t in commissioning, operating and maintaining the equipment. VLT® AutomationDrive comes in a standard version (FC 301) and an advanced high dynamic version (FC 302) with additional functionalities.

vfd2

VLT® HVAC Drive

The VLT® HVAC Drive continues Danfoss leadership in dedicated HVAC features and applications for drives. Advancements in energy monitoring, trending, system maintenance and operation are combined with a modular platform to make the drive easy to operate while feeding back all the operation information you need..

VLT® AQUA Drive

VLT® AQUA Drive is the perfect match for pumps and blowers in modern water and wastewater systems, offering advanced application protective features. Available with cascade control of up to 8 pumps in fixed speed mode or master/follower mode.

VLT® 2800 Series

An extremely compact series of drives designed for sideby- side mounting and developed specifically for the low power market.
2

VLT® Micro Drive

A compact general purpose drive for AC motors up to 22 kW. It performs perfectly even in complex application set-ups and optimises energy efficiency and operation.

VLT® Decentral Drive FCD 302

The VLT® Decentral Drive FCD 302 is the new generation of the highly successful VLT® Decentral FCD 300, based on the VLT® AutomationDrive FC 302 platform. It combines the key features of both products in a completely re-designed enclosure, made for best fi t on direct machine mounting.

VLT® Decentral Drive FCD 300

The VLT® FCD 300 is a complete frequency converter designed for decentral mounting. It can be mounted on the machine/wall – close to the motor – or directly onto the motor. The decentral design eliminates the need for space-consuming control cabinets and the need for long screened motor cables is signifi cantly reduced.
5

VLT® DriveMotor FCM 300

The VLT® FCM 300 Series is an integrated drive-motor solution which combines a VLT® frequency converter and a high standard quality induction motor in a single product. The frequency converter is attached in place of the motor terminal box and it is no higher than the standard terminal box – nor wider or longer than the motor.

VLT® One Gear Drive

The One Gear Drive™ is designed especially for use in the food and beverage industry. It comes in two versions, the HygienicDrive and the Standard version. The HygienicDrive is certifi ed for use in clean rooms and the pharmaceutical industry. The compact construction of the One Gear Drive makes it especially suitable for mounting on transport and conveyor systems.

VLT® Integrated Servo Drive

The new ISD 410 is a high performance Integrated Servo Drive system based on PM motor technology. The motion control is integrated in the drive. The communication bus is CAN. It is a system for applications with a variable number of axis and it allows fl exible machine structure within food & beverage and packaging.
8

VLT® Soft Starter MCD 500

A total motor-starting solution with advanced start, stop and protection features, Adaptive Acceleration Control, inside delta connection, 4 line graphical display and multiple programming setup menus.

VLT® Compact Starter MCD 200

The VLT® Compact Starter MCD 200 is a compact and cost eff ective soft starter range for applications where direct-on-line starting is undesirable. MCD 200 is, because of its size and functionality, a good alternative to other reduced voltage starting methods such as star/ delta starters.

VLT® Advanced Active Filter AAF 006

A fl exible and adaptable solution for central or decentral harmonic mitigation. Danfoss Advanced Active Filters can compensate for individual VLT® drives as a compact integrated solution or can be installed as a compact stand-alone solution at a point of common coupling, compensating for multiple loads simultaneously. Danfoss Active Filters can operate at medium voltage level by means of a step-down transformer.
11

VLT® Advanced Harmonic Filter AHF 005/010

The Danfoss Advanced Harmonic Filters have been specially designed to match the Danfoss frequency converters. The solution is available in two variants, AHF 005 and AHF 010, connected in front of a Danfoss frequency converter, the harmonic current distortion generated back to the mains is reduced to 5% and 10% Total Harmonic Current Distortion at full load.

VLT® Common Mode Filters

Common mode fi lters are placed between the frequency converter and the motor. They are nano-crystalline cores that mitigate high frequency noise in the motor cable (shielded or unshielded) and reduce bearing currents in the motor.

VLT® Sine-Wave Filters

Sine-wave fi lters are placed between the frequency converter and the motor. They are low-pass fi lters that suppress the switching frequency component from the frequency converter and smooth out the phase-to-phase output voltage of the frequency converter to make it sinusoidal. This reduces the motor insulation stress, bearing currents and eliminates the switching acoustic noise from the motor.
14

VLT® dU/dt Filters

du/dt fi lters are placed between the frequency converter and the motor. They are diff erential-mode fi lters that reduce motor terminal phase-to-phase peak voltage spikes and reduce the rise time to a level that lowers the stress on the insulation of motor windings. du/dt fi lters are smaller, weigh less and have a lower price compared to sine-wave fi lters.

VLT® Soft Starter MCD 100

The VLT® Soft Starter is a cost eff ective and extremely compact soft starter for AC motors from 1.1 – 11 kW. Due to a unique semiconductor design it is a true “fi t and forget” product.

VLT® Low Harmonic Drive

Meets the toughest harmonic requirements under all load/grid conditions. The Danfoss VLT® Low Harmonic Drive is the fi rst solution combining an active fi lter and a drive in one package. The VLT® Low Harmonic Drive continuously regulates harmonic suppression according to the load and grid conditions without aff ecting the connected motor.
17

VLT® 12-Pulse Drives

A robust and cost eff ective harmonic solution for the higher power range. The Danfoss VLT® 12-pulse drive off ers reduced harmonics for demanding industry applications above 250 kW. The VLT® 12-pulse is a high effi ciency variable frequency converter which is built to the same modular design as the popular 6-pulse VLT® drives.

VLT® Motion Control Tool MCT 10

For managing drive parameters in systems, the Motion Control Tool MCT 10 is the perfect tool to handle all drive-related data.

VLT® MCT 31 Harmonics Calculation Software

With VLT® MCT 31, you can determine whether harmonics will be an issue in your installation when drives are added. VLT® MCT 31 estimates the benefi ts of adding various harmonic mitigation solutions from the Danfoss product portfolio and calculates system harmonic distortion.
20

VLT® Energy Box

With VLT® Energy Box software you can both theoretically in project face estimate and afterwards physically validate your real energy savings and reductions in your carbon footprint – from your desk.

VLT® Service – Your way

DrivePro™ is an effi cient productivity programme tailored to meet your specifi c needs. All the necessary VLT® Service facilities are at your disposal, which will minimize downtime and increase productivity at your factory.

Vacon NXP Air Cooled Frequency Converter

The VACON NXP Air Cooled drive is designed for a broad range of demanding Industrial application, focusing on higher power sizes ad system drives.
20

VLT® Energy Box

With VLT® Energy Box software you can both theoretically in project face estimate and afterwards physically validate your real energy savings and reductions in your carbon footprint – from your desk.

VLT® Service – Your way

DrivePro™ is an effi cient productivity programme tailored to meet your specifi c needs. All the necessary VLT® Service facilities are at your disposal, which will minimize downtime and increase productivity at your factory.